Index

building from source, 2

CTC0, 5

divider_network_lower_resistor(), 8
divider_network_voltage(), 8

EEPROM, 3

gentle_eeprom_write_block(), 3
gentle_eeprom_write_byte(), 3
gentle_eeprom_write_dword(), 3
gentle_eeprom_write_word(), 3

htonb2(), 10
htonb3(), 10
htonb4(), 10
htonl(), 10
htons(), 10

installation, 2
Internet Protocol, 10

network order, 10
NTC (negative temperature coefficient), 9
ntohb2(), 10
ntohb3(), 10
ntohb4(), 10
ntohl(), 10
ntohs(), 10

OCIE0, 5
OCR0, 5

PORTD, 5, 5ii
PORTE, 5, 5ii, 5iii

resistor divider networks, 8

SPDR, 7
SPI, 6, 7
spi2_busy(), 6
spi2_init(), 6
spi2_send_byte(), 6
spi2_send_data(), 6
spi3_clear_pending(), 7
spi3_clock_data(), 7
spi3_init(), 7
spi3_no_isr_clear_pending(), 7
spi3_no_isr_clock_data(), 7
spi3_no_isr_init(), 7
spi3_no_isr_pend_data(), 7
spi3_no_isr_wait(), 7
spi3_pend_data(), 7
SPIF, 7
SPSR, 7

TCCR0, 5
thermistor, 9
thermistor_t2_at_r2(), 9
tx_only_chr(), 5
tx_only_clear(), 5
tx_only_init(), 5
tx_only_port_high(), 5
tx_only_port_low(), 5
tx_only_str(), 5
tx_only_str_P(), 5

UART, software-based, 5
uart_generate_ubrr(), 4
uart_rx_char(), 4
uart_rx_clear(), 4
uart_rx_init(), 4
uart_rx_init_no_isr, 4
uart_tx_char(), 4
uart_tx_clear(), 4
uart_tx_data(), 4
uart_tx_init(), 4
uart_tx_init_no_isr(), 4
uart_tx_str(), 4
uart_tx_str_P(), 4
uart_tx_str_partial(), 4
uart_tx_str_partial_P(), 4
UBRR, 4
USART, 4